Photron FASTCAM-X 1280PCI, Руководство по оборудованию

Страница: 27 / 43

FASTCAM-X1280PCI Series Hardware Manual
- 27 -
2.4.3. Setting camera ID numbers
For the software to recognize each camera correctly in multi-camera sync operation, the
FASTCAM-X 1280PCI can be assigned an ID number from 0 to 3. By this feature, each of the
cameras is correctly recognized even if the order of camera recognition by the OS changes.
Assign ID numbers in the following manner.
1) Dip switch setting for camera ID
Camera ID number are assigned by setting the dip switches No. 1 and No. 2 as shown in the table
below:
ID Number Switch No. 1 Switch No. 2
0
1 2 3 4
ON
OFF OFF
1
1 2 3 4
ON
ON OFF
2
1 2 3 4
ON
OFF ON
3
1 2 3 4
ON
ON ON
Note: Factory-set ID number is
“
0
”
.
Caution: Do not duplicate ID numbers on multiple boards.