11
FASTCAM Nova
1
.2
Pa
rt
Na
m
es
1.2.6.
Gigabit Ethernet Connector
It is an Ethernet connector for communicating with the PC and is a common RJ45
connector.
Connect a 1000BASE
-
T compatible interface board and this product with a LAN cable. For
the LAN cable, prepare a UTP or STP Cat 5e (enhanced category 5) or higher LAN cable.
(UTP: Unshielded Twisted Pair, STP: Shielded Twisted Pair)
The maximum cable length between the PC and the system is, compliant to the
1000BASE
-
T specification, up to 100 m. One PC can connect to a maximum of 64 Photron
Gigabit Ethernet interface equipped cameras using a hub. When connecting multiple
devices, connect through a switching hub that can connect at 1000BASE
-
T. The maximum
length of the cable that connects the system (or PC) to the switching hub is also 100 m.
•
Photron recommends using an STP cable over long distances or in noisy locations.
•
When connecting the camera to a network device of 10G Ethernet, it is necessary to set
the setting on the network device side to "1Gbps" speed or to add a switching HUB
corresponding to 1000 BASE
-
T in between.
•
The system's factory default IP address is below:
IP ADDRESS
:
192.168.0.10
NETMASK
:
255.255.255.0
GATEWAY ADDRESS
:
0.0.0.0
Содержание FASTCAM Nova
