Photron Fastcam BC2 HD, Руководство по оборудованию

Страница: 24 / 83

2. Setup
12
2.2.7. Power Supply Connector
This connector is used to input the DC power supply. Connect the supplied AC adapter or the
optional IDX battery cable (battery sold separately) to this connector.
The connector for the cable is available as an optional accessory. When using other power
supplies, construct a cable using the pin diagram below for reference.
DC 18-36V 100VA Pin
Diagram
PT02A-8-4P (023)
Connector name Signal
Pin
no.
Camera body
connector model
name (manufacturer)
Cable connector
model name
(manufacturer)
+18V to +36V
IN
A
POWER GND B
POWER GND C
DC18-36V 100VA
+18V to +36V
IN
D
PT02A-8-4P (023)
(Amphenol)
PT06A-8-4S (424)
(Amphenol)
When using the connector pins directly, refer to the chart above and ensure the wiring is
correct.
If the wiring is incorrect, not only is there the danger of the system malfunctioning, but
also of fire and electric shock.
Do not use a power supply which does not meet the system's specifications or a power
supply that is not guaranteed to be safe.
By using a power supply outside of the system specifications, there is not only the
danger of the system malfunctioning, but also of fire and electric shock.
Warning
Warning