PHOTONIS NOCTURN XS MONO, Руководство пользователя

Страница: 19 / 44

NOCTURN XS MONO USER GUIDE
PHOTONIS USA Proprietary and Confidential Information
6170 Research Road | Suite 208, Frisco, Texas 75033
19
Command Optional Payload Description
16 Set the line noise filter to use 16 columns
cs vbo [0‐255] Sets the video black offset when the line
noise filter is enabled
cs active 0
1
Clears the sensor active signal to the CMOS
image sensor
Set the sensor active signal to the CMOS
image sensor
cs dumptbl Displays camera sensor register default
table data to console (store in camera)
cs dump Displays current sensor register settings
read from sensor on the console
cs rd xx Reads camera sensor register address xx
and display value on the console
cs wr xx dd Write camera sensor register address xx
with value dd
cs save user Save current sensor register settings as
power on default (the gain and exposure
settings will be ignored and the value
entered in under the agc setup will be used)
A list of all possible registers for the “cs wr” and “cs rd” is given in Table 8. It is
recommended to refer to the LYNX CMOS datasheet for further explanation of the sensor
register settings. Typical usage of the “cs wr” and “cs rd” command should be as follows:
Writing register:
CS wr <Address> <Value><CR><LF>
Reading register
CS rd <Address><CR><LF>
Table 8 CMOS Sensor Registers
Name Address Size Description