Photon Focus MV1-D1280-L01-1280-G2-12 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 139

Photon Focus MV1-D1280-L01-1280-G2-12 Скачать руководство пользователя страница 8

1 Preface

1.2

About Photonfocus

The Swiss company Photonfocus is one of the leading specialists in the development of CMOS
image sensors and corresponding industrial cameras for machine vision.

Photonfocus is dedicated to making the latest generation of CMOS technology commercially
available. Active Pixel Sensor (APS) and global shutter technologies enable high speed and
high dynamic range (120 dB) applications, while avoiding disadvantages like image lag,
blooming and smear.

Photonfocus’ product range is complemented by custom design solutions in the area of camera
electronics and CMOS image sensors.

Photonfocus is ISO 9001 certified. All products are produced with the latest techniques in order
to ensure the highest degree of quality.

1.3

Contact

Photonfocus AG, Bahnhofplatz 10, CH-8853 Lachen SZ, Switzerland

Sales

Phone: +41 55 451 00 00

Email: [email protected]

Support

Phone: +41 55 451 00 00

Email: [email protected]

Table 1.1: Photonfocus Contact

1.4

Sales Offices

Photonfocus products are available through an extensive international distribution network
and through our key account managers. Contact us via email at [email protected].

1.5

Further information

Photonfocus reserves the right to make changes to its products and documenta-
tion without notice. Photonfocus products are neither intended nor certified for
use in life support systems or in other critical systems. The use of Photonfocus
products in such applications is prohibited.

Photonfocus and LinLog

®

are registered trademarks of Photonfocus AG.

CameraLink

®

and GigE Vision

®

are a registered mark of the Automated Imag-

ing Association. Product and company names mentioned herein are trademarks
or trade names of their respective companies.

Reproduction of this manual in whole or in part, by any means, is prohibited
without prior permission having been obtained from Photonfocus AG.

Photonfocus can not be held responsible for any technical or typographical er-
rors.

8 of 139

MAN077 11/2017 V1.0

«
...
6
7
8
9
10
...
»

Содержание MV1-D1280-L01-1280-G2-12












































































































































Отзывы:

Нет отзывов