Photon Focus MV1-D1280-L01-1280-G2-12, Руководство пользователя, Страница: 51 / 139

5.2 Trigger and Strobe
AcquisitionMode After the command AcquisitionStart is executed:
Continuous Camera aquires image frames continuously. Acquisition can be
stopped by executing
AcquisitionStop command.
SingleFrame Camera acquires one frame and acquisition stops.
MultiFrame Camera acquires n=
AcquisitionFrameCount
frames and acquisition
stops.
SingleFrameRecording Camera saves one image on the on-board memory of the IP engine.
SingleFrameReadout One image is acquired from the IP engine’s on-board memory. The
image must have been saved in the
SingleFrameRecording mode.
ContinuousRecording Camera continuosly saves images on the on-board memory of the
IP engine until the memory is full. The size of available on-board
memory is 24 MB.
1)
ContinousReadout All Images that have been previously saved by the
ContinuousRecording mode are acquired from the IP engine’s
on-board memory.
Table 5.3: AcquisitionMode and Trigger (Footnotes:
1)
Memory can be used to manage GigE image transfer,
for high speed recording, the image burst memory should be used)
MAN077 11/2017 V1.0 51 of 139