1. INSTALLATION
& ASSEMBLY
INSTRUCTIONS
1. Open the box and carefully remove the printer.
Do not pull the printer out by the linear drive/z-
axis.
2. Connect the B end of the power supply cable
to the power supply and insert into the back of
the printer. Turn the printer on using the rocker
switch located at the back of the printer. The
touchscreen at the front will turn on. The screen
will start making a system check and the welcome
screen will appear a few seconds later.
3. Touch the screen button marked “Maintain”, then
on the next screen touch the button 50”.
This will lift the platform and allow the packing
material to be removed from the vat.
4. Remove the vat and check that it is clean. Replace
the vat.
5. Touch the screen button marked “Home”. This
will lower the platform to the home position.
NOTE:
Ensure that hands and objects are kept
clear of the moving platform to avoid injury.
6. Before you fill the resin double check that the
platform is parallel with the screen.
7. If you are experiencing difficulties setting up
your printer please visit our website:
www.photocentricgroup.com/support.
ASSEMBLY INSTRUCTIONS
6
CON
TENTS
2 x Disposable Vat
250g of Firm
Cream resin
Power supply
for the printer
USB with
Photocentric
Studio
The box
contains
Liquid Crystal
HR2 3D Printer
with red hood
RECOMMENDED ITEMS
• Extra gloves.
• Paper towels.
• Access to a sink with hot water to clean the
object.
• Liquid soap (detergent) to clean the object.
• Soft brush or sponge to clean the object.
• Glass or clear plastic container to post ex-
pose the object in.
• Ultrasonic cleaner (Optional)
MINIMUM COMPUTER
REQUIREMENTS
•
Operating System Windows 7, 8 or 10
•
Minimum 2.0 Ghz processor speed 2 cores (recommended 4
cores)
•
GPU capable of opening opengt verison 3.0 or higher.
•
_net framework version 4.0
•
64bit system: minimum 2GB of RAM, recommended 4GB
Pl
Flex plate
A Photocentric Studio license is included with this printer.
Please follow the steps from page 14 to install and activate
your software.
HR2
HR2
Print sample
Paper resin filters
Spray Bottle
Plastic “credit card”
Scraper
Allen Key
Funnel
Gloves x2
5
