CAUTION
• Do not use abrasive cleaners to clean your PH-M90
because this could cause scratches and damage.
• Do not bring your PH-M90 in to contact with any
sharp objects because this could cause scratches
and damage.
• Do not insert anything into your PH-M90 unless
otherwise specified in the user instructions. This
may damage the internal components.
• Do not attempt to repair, modify, or disassemble
your PH-M90 yourself, it does not contain any user
serviceable components.
• Do not attempt to replace your PH-M90 battery, it is
built-in and is not changeable.
• Use only the manufacturer supplied charger to
charge your PH-M90. Other chargers may look
similar, but using them could result in electric shock
and could damage the PH-M90.
• Observe all signs and displays that require an
electrical device or RF radio product to be
switched off in designated areas.
• Turn off your PH-M90 prior to boarding an aircraft.
Do not use the PH-M90 inside an aircraft unless
allowed by your airline.
• Dispose of the PH-M90 and the PH-M90’s battery in
accordance with local regulations. Do not dispose of
the battery with regular household waste.
13
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed or used in accordance with the instructions,
it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1
Reorient or relocate the receiving antenna
2
Increase the separation between the equipment and the receiver
3
Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected
4
Consult the dealer or an experienced radio/TV technician for
additional suggestions.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment. Where shielded interface cables have been
provided with the product or specified additional components or
accessories elsewhere defined to be used with the installation of
the product, they must be used in order to ensure compliance with
FCC regulation.
IMPORTANT NOTICE:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC INFORMATION
