Phonocar 09302, Инструкция по эксплуатации

Страница: 21 / 24

21
EN
09302
PROGRAMMING FUNCTIONS THAT CAN BE ACTIVATED ON THE MAIN UNIT
Turn on the ignition with the alarm off and hold down the button 3 (MUTE) on the radio remote control until
the LED on the vehicle lights up (about 7 seconds), then release.
While the LED remains on (for about 3 seconds) press button 3 (MUTE) again: a short high-pitched Beep
confirms that the programming is on.
The LED will turn off and give five different visual indications, depending on the five functions that can be selected:
see table.
LED FUNCTIONS ACTIVATON DEACTIVATION
1 flash 13. ALARM DISARMING WITH
USER RECOGNITION
Press button 1 (ARMING) on the
radio remote control after the first
flash of the LED on the vehicle.
CONFIRMATION SIGNAL:
the siren emits 3 Beeps.
Press button 2 (DISARMING)
on the radio remote control after
the second flash of the LED on the
vehicle.
CONFIRMATION SIGNAL:
the siren emits 1 Beep.
2 flashes
BEEP ARMING/DISARMING
Press button 1 (ARMING) on the
radio remote control after the first
flash of the LED on the vehicle.
CONFIRMATION SIGNAL:
the siren emits 3 Beeps.
Press button 2 (DISARMING)
on the radio remote control after
the second flash of the LED on the
vehicle.
CONFIRMATION SIGNAL:
the siren emits 1 Beep.
3 flashes 15. DIRECTION INDICATORS
ALARM
Press button 1 (ARMING) on the
radio remote control after the first
flash of the LED on the vehicle.
CONFIRMATION SIGNAL:
the siren emits 3 Beeps.
Press button 2 (DISARMING)
on the radio remote control after
the second flash of the LED on the
vehicle.
CONFIRMATION SIGNAL:
the siren emits 1 Beep.
4 flashes 14. ANTI-HIJACK ALARM
Press button 1 (ARMING) on the
radio remote control after the first
flash of the LED on the vehicle.
CONFIRMATION SIGNAL:
the siren emits 3 Beeps.
Press button 2 (DISARMING)
on the radio remote control after
the second flash of the LED on the
vehicle.
CONFIRMATION SIGNAL:
the siren emits 1 Beep.
5 flashes 16. EXTERNAL INPUT POLARITY
(default negative polarity)
POSITIVE POLARITY
Press button 1 (ARMING) on the
radio remote control after the first
flash of the LED on the vehicle.
CONFIRMATION SIGNAL:
the siren emits 3 Beeps.
NEGATIVE POLARITY
Press button 2 (DISARMING)
on the radio remote control after
the second flash of the LED on the
vehicle.
CONFIRMATION SIGNAL:
the siren emits 1 Beep.
TABLE OF FUNCTIONS