18
19
Direct Memory
Besides the Speed Dial Memory, the
R
ELATION
telephone is also equipped
with 10 Direct Memory banks.
To store a number in the Direct Memory
1.
In on-hook mode, press the
button until the display shows
“
”.
2.
Enter the desired phone number. You may enter
or
in the
dialling sequence. If your phone is connected to a PABX switching
system, you may enter
/
P
(PAUSE) in the dialling sequence to
insert a timed delay when necessary.
3.
Press the
button once again, “
” will appear on the display.
4.
Press a numbered button from
0
to
9
to select a memory bank
location. The display will show “
SAVE OK
”.
5.
Press the button twice to return to standby mode.
Direct Memory cannot be erased in this unit. New blank memory entries
need to be entered in each location to overwrite the old one.
To make a call from the Direct Memory
1.
In on-hook mode, press and hold the desired numbered
button from
0
to
9
until the display shows the stored number.
2.
Lift the handset or press the
button. The number will dial
out automatically.
To review the number in the Direct Memory
1.
In on-hook mode, press and hold the desired numbered
button
0
to
9
. The display will show the stored number.
NOTE:
The maximum number of digits which can be entered is 20. If the
number exceeds 20 digits, the display will show “
TOO LONG
” and the extra
digits will not be stored.
Speed Dial Memory
English
To make a call from the Speed Dial Memory
1.
Lift the handset and wait for the dial tone.
2.
Press the desired Speed Dial Memory (
M1, M2, M3
) button.
3.
The desired phone number will be dialled accordingly.
Alternatively:
1.
Press the Speed Dial Memory (
M1, M2
,
M3
) button.
2.
Then, lift the handset or press the
button.
To copy the numbers to the Speed Dial Memory
Numbers in the Caller ID memory (See “
Operation of Caller ID
”) or
Redial Memory can be copied to the (
M1, M2 M3
) memory locations. Do as
follows:
1.
When a number shows on the display, press and hold the desired
memory location (
M1, M2, M3
).
2.
The display shows “
SAVE OK
” thereby confirming that the number
has been stored correctly.
To review the numbers in the Speed Dial Memory
1.
In on-hook mode, press one of the buttons (
M1, M2
,
M3
).
2.
The display will show the stored number accordingly.
NOTE:
The maximum number of digits which can be entered is 20. If the
number exceeds 20 digits, the display will show “
TOO LONG
” and the extra
digits will not be stored.