![background image](http://html1.mh-extra.com/html/phonic/dfx256/dfx256_user-manual_1552866004.webp)
INTR
INTR
INTR
INTR
INTRODUCTION
ODUCTION
ODUCTION
ODUCTION
ODUCTION
Congratulations on your purchase of the Phonic DFX256
digital reverberator. The DFX256 is a high quality and
easy-to-use stereo digital reverberator. To take full ad-
vantage of the DFX256’s functions, and enjoy a long
and trouble-free use, please read this user’s manual
carefully and keep it for future reference.
FEATURES
255 effect programs available
Programs include reverb, delay, echo, flanger,
chorus, panner effects and combinations
24 bit digital signal processing plus 20 bit AD/DA
conversions
True stereo reverb
Easy-to-read 2-digit LED display
Compact “1U” rack mount dimensions
Foot SW Jacks allow the user of a footswitch to
mute the effect
Auto-bypass when power is off.
Bi-color Peak LEDs enable easy setup of the opti-
mum input level
A professional quality digital reverb designed for
musical instruments,recording, and sound reinforce-
ment
1
INPUT LEVEL CONTROL
The input level control sets the level going into the
DFX256. You should set the level so that Peak (2)
indicators only flash RED occasionally.
PHONIC CORPORATION
Page 4
INTRODUCTION / FEATURES / GETTING STARTED / FRONT-PANEL DESCRIPTION
DFX256 USER
’
S MANUAL
FR
FR
FR
FR
FRONT
ONT
ONT
ONT
ONT-P
-P
-P
-P
-PANEL DESCRIPTION
ANEL DESCRIPTION
ANEL DESCRIPTION
ANEL DESCRIPTION
ANEL DESCRIPTION
1.
Check the AC voltage before connecting
the plug. Choose the main supply for the
sound system with care. Do not share
sockets or earthing with light dimmers.
2.
Run audio cables separately from dimmer
wiring, using balanced lines wherever
possible. If necessary, cross audio and
lighting cables at 90
o
right angles to mini-
mize the possibility of interference. Keep
unbalanced cabling as short as possible.
3. Check your cables regularly and label each
end for easy identification.
4.
Before switching on the main power, keep
all output rotary faders all the way down to
prevent damage or excessive noise
caused by bad level adjustment, wrong
w i r i n g , d e f e c t i v e c a b l e s , o r b a d
connections.
5.
Always turn on the DFX256 before the
power amplifier; turn off the DFX256 after
turning off the amplifier.
6.
Always turn off the unit before connecting
or disconnecting the unit to the power
source.
7.
Never use any solvents to clean the unit.
Clean it with a soft, dry cloth.
GETTING ST
GETTING ST
GETTING ST
GETTING ST
GETTING STAR
AR
AR
AR
ARTED
TED
TED
TED
TED
2
PEAK (L/R) INDICATORS
They are bi-color LEDs. In most cases, they light up
green as “signal” LEDs, and will turn red when the
DFX256 is receiving a peak level signal. In general, a
few red flashes every now and then will not be a
problem. If the LEDs flash red very often or remain on
red, then reduce the input level control (1).
Содержание DFX256
