Phonic DFX256, Руководство пользователя

Страница: 5 / 16

3
MIX (DRY / WET) CONTROL
This control sets the balance between the unaf-
fected signal coming through the inputs and the
effects being generated by the DFX256 i.e. the
balance of wet (effect) and dry (no effect)
sounds. By keeping the Mix somewhere in the
center, a blend of dry and wet signal can be
achieved.
4
LED DISPLAY
This 7-segment display indicates the current ef-
fect program in Program mode.
5
EFFECT MODES CHART
This chart shows you what 16 effect modes are
in the DFX256.
PHONIC CORPORATION Page 5
DFX256 USER ’ S MANUAL
REAR-PANEL DESCRIPTION
10
AC 10V IN INLET
The supplied AC Adapter is plugged into this
connector.
11
FOOTSWITCH
This is a 1/4” stereo phone jack. If a foot switch
is connected to this jack, you can use your foot
to switch the effect program on/off (bypass).
REAR-PANEL DESCRIPTION
12
OUTPUT (LEFT & RIGHT)
There are 1/4” phone jacks which connect to
devices such as the effects returns on a mixing
console or power amplifier inputs. For mono
applications, use the “Left” output.
13
INPUT (LEFT/MONO & RIGHT)
There are 1/4” phone jacks which connect to
sources such as the effects sends of mixing
consoles. For mono applications, use the “Left/
Mono” input.
6
EFFECT MODE
¡µ ¡µ
¡µ ¡µ ¡µ
, ,
, , ,
¡¾ ¡¾
¡¾ ¡¾ ¡¾
KEYS
These keys allow you to select the various effect mode.
7
PATTERN SELECTOR
This rotary Selector allows you to set one of 16 pa
tterns of the current effects.
8
OUTPUT CONTROL
This rotary control sets the level going to the amplifier or
mixer from the output of the DFX256.
9
POWER SWITCH
This switch turns the power of the DFX256 on/off. When
power is off, the DFX256 will be in signal bypass
position automatically i.e. this feature allows the
direct signal to pass through the DFX256 even
when the power is not switched on.