Phonic CELEUS 100, Руководство пользователя

Страница: 9 / 28

5
CELEUS 100
English
19. EFX Control
This control alters the signal level
that is sent to the EFX output, which
can be used in conjunction with
external signal processors (this
signal of which can be returned to
mixer via the stereo return inputs),
or simply as additional auxiliary
outputs for any means required.
This control also adjusts the level
of audio that is sent to the built-in
digital effect panel.
20. Pan / Balance Controls
This alternates the degree or level
of audio that the left and right side
of the main mix should receive. On
mono channels, the PAN control
will adjust the level that the left and
right should receive (pan), where
as on a stereo channel, adjusting
the BAL control will attenuate
the left or right audio signals
accordingly (balance).
21. Peak & Signal Indicators
These LEDs will light up when
signals reach certain levels. The
Signal LED on the right will light
up when any audio signal is present on the channel. The
indicator on the left (Peak) will light up when the channel
hits high peaks, 6 dB before overload occurs.
It is best to adjust the channel level control so as to allow
the Peak indicator to light up on regular intervals only. This
will ensure a greater dynamic range of audio.
22. Channel Level Control
This control will alter the signal level that is sent from the
corresponding channel to the main mix.
23. +4 / -10 Buttons
These buttons, located on
stereo channels, are used
adjust the input sensitivity of
the corresponding channel,
which will adapt the mixer to
external devices dependeing
on their operating levels. If the input source is -10 dBu
(consumer audio standard), it is best to engage the switch,
giving the signal a slight boost. If the input source is +4
dbV (professional audio standard) the button should be
disengaged. If you are unsure of the source’s operating
level, leave the switch disengaged until you test the
source’s signal level.
24. 'BT' and 'USB Player' buttons
Located on channels 2 and 3, these
buttons enable their corresponding
channels to be used for their
respective digital audio signals.
The BT button allows channel 2
to be used for the Bluetooth audio
streaming function, while the USB
Audio button allows channel 3 to
control the USB playback signal
from the onboard USB recorder.
Digital Effect Processor
25. Program Control
This control will allow users to select one of the 16 built-
in digital effects of the CELEUS analog mixer. The effect
names that correspond with the numbers can be found on
the top of the mixer’s face, or in the digital effect table.
26. Effects On Button and Indicator
Pushing this button will turn the
built-in effect processor on and
off. When the effect processor
is activated, the corresponding
LED will light up to indicate so.
27. Parameter Control
Turning this control will adjust
the one main parameter of the
selected effect. Each effect’s
parameter can be found on the
digital effect table.
28. EFX RTN Control
This control adjusts the
final output level of the DFX
processor as sent to the main
mix. For more EFX in your
signal ('wet'), turn this control
up and your channels' level
controls down. For 'dryer' audio,
turn the individual channel level
controls up and reduce the EFX
control.
29. "To Phones" Button
This button will allow you to
send your EFX signal to the
Headphone mix for monitoring.
30. EFX Send Control
This is the final level control for the EFX Send mix. Your
EFX mix is created by using the individual EFX controls
found on input channels 1 through 3.
15
16
17
18
19
20
22
21
23
25
27
28
30
29
26
24