Phonetics Skymetry WTU-14, Руководство пользователя

Страница: 67 / 114

Enter the name for this destination (up to 12 characters) and in the
Type
field select
Voice
. In the
Phone #
field enter the area code and
telephone number. A sample alarm telephone call is shown below:
“Hello, Sensaphone Inc. has a message for ‘Mike’
<destination name> .”
“To accept the message press 1.”
“To cancel the message press 2.”
{ press 1 to hear the alarm message}
“Skymetry alarm at 'Oak Station'
<unit name>
,
SkyID number ‘1123350’ <skyid> .”
“Contact 4, ‘High Float’ <input name> is in alarm.”
To acknowledge send #### <alarm ID>
“To replay message, press the * key.”
“To reply to the message, press 2.”
“To end this call, press 3.”
To acknowledge the alarm you must press “2” (reply to the mes-
sage)
. Next, enter the four digit
alarm ID
that was spoken at the end
of the message followed by the “#” key. When prompted to send the
message, enter the “#” key again. The
alarm ID
is a unique number
that identifies the alarm and the destination. Note that a different
alarm ID number will be sent to each destination—even for the
same alarm.
Internet E-Mail
The WTU-14 can send alarm messages to internet e-mail address-
es. The alarm message will comprise information from within
your Skymetry WTU-14 including the programmed
Unit Name ,
Destination Name , and Input Name . To program an e-mail destina-
tion, click on the Alarm Notification tab.
Chapter 8: Notification
67