Phonetics Skymetry WTU-14, Руководство пользователя

Страница: 65 / 114

Chapter 8: Alarm Notification
The Skymetry WTU-14 can deliver alarm message notifications
by voice phone call, internet e-mail, and text messaging to various
messaging devices and cell phones. A total of 24 notification desti-
nations can be programmed to be contacted in the event of an alarm.
The unit also lets you to set an escalation level for each destination,
allowing you to have a group of people contacted first (tier 1) and,
if the alarm is not acknowledged, a second group of people (tier 2)
contacted. You can program up to 24 tier levels of destinations and
include a programmable delay time between each tier.
How does notification work
Once an alarm occurs, the Skymetry will begin sending its alarm
message to the programmed destinations. The unit will start with
destinations at tier 1. Once the
Tier Delay expires, the unit will start
sending alarm messages to destinations in the next tier. The Tier
Delay time begins as soon as the alarm occurs, so if it were pro-
grammed to 60 minutes, the next tier would start receiving alarm
messages one hour after the alarm occurred. The Skymetry will
send its alarm message to each destination until it receives acknowl-
edgment, or it will automatically acknowledge the alarm after all
destinations have been sent the message or when the last tier delay
time has expired.
Note : If you are logged in through the serial port, no alarms
will be sent until you log off and disconnect the serial cable. If
you acknowledge the alarm through the software before logging
off, no alarm messages will be sent. This can be useful for per-
forming on-site maintenance or testing the system. If you are
not logged on through the serial port the alarm messages will be
sent immediately, one at a time.
Chapter 8: Notification
65