LOCATION OF CONTROLS AND FEATURES
Talk
The key is used to access the telephone line or end a call.
Directory Key
Use to program and retrieve the numbers in the speed dial directory.
Delete Key
/CHAN
When viewing or editing menus and logs, the key is used to erase digits on the
display, and single or multiple entries from the phone book and Caller ID directories.
The /CHAN key, when pressed while the phone is off-hook, will scan up to 40
channels and select the clearest one to provide the best possible reception.
Dial Pad
Numeric keys are used in the conventional manner for dialing.
Up/Down Key
The
key let you scroll through menus and logs. Also used to access Caller ID
information stored in memory.
Redial Key
/SAVE
When the phone is idle or off-hook, press to redial the last number dialed. The
/SAVE key is used to save numbers into the phone book and other settings. It is
also used to insert a programmable pause into a number stored in the phone book.
Flash Key
/EDIT
The /EDIT key is used to access telephone company services, like call waiting.
It is also used to create and edit phone book entries.
Menu Key
/VOICE MAIL
The key is used to access the handset settings. The /VOICE MAIL key
can also be programmed to do one-touch dialing of a single number, such as your voice
mail service number.
Temporary Tone Key
If the base is set to pulse dialing, pressing causes subsequent digits to be dialed
out using tone until the line is put back on hook.
View Left Key
and
View Right Key
Use to view the left part of the display and move the cursor left when editing. Use
to view the right part of the display and move the cursor right when editing.
Headset Jack
Allows using a headset with a standard 2.5mm plug for hands-free convenience.
Volume Switch
(Hi/MID/LOW)
Adjust the switch to select the receiver volume between HI, MID, and LOW.
Talk
DIR
Talk
DIR
Delete
Delete
Delete
Redial
Redial
Redial
Flash
Flash
Menu
Menu
Menu
8
OTHER FEATURES
Using the Handset Finder (PAGE)
1. Press on the base and the phone will beep.
2. Press any key on the handset, or place the handset in the base to stop the
page/find feature.
Out-of-Range Warning
If you venture too far from the base, the handset will beep. Reverse your
direction to re-establish connection with the base or the call will be dropped.
When the base detects that the handset has been out of range for 20 continuous
seconds it will release the engaged line.
Channel Changing
If you are experiencing interference during a telephone call, press the
/CHAN key. The PMP-3850 will scan up to 50 channels and select the
clearest one to provide the best possible reception.
PAGE
PM
If the handset is within
range, it will beep until a
key is pressed.
Delete
39
