SPEED DIALING
Preferred Calls
You can assign stored numbers as preferred calls. When an incoming call is
matched to a stored number designated as preferred, the phone will generate a
special ring sound after caller ID information is received.
To mark a phone book entry as preferred, add a "#" mark at
the beginning of the name during programming or editing.
Blocked Calls
If you do not want to have the phone ring when a specific number calls, you can
store that number in the phone book and assigned it as blocked. When an
incoming call is matched to a stored number designated as blocked, the phone
will not ring after caller ID information is received.
To mark a phone book entry as blocked add a "
*"
mark at
the beginning of the name during programming or editing.
32
Tone/Pulse Switch
1. Choose the correct dialing mode.
2. Select the dialing mode Tone or Pulse by
setting the switch on the bottom of the
base unit.
Note:
Changes to the switch position
during a call do not tak e effect until
the call has ended.
Tip:
If you are unsure of the proper dialing mode, make a trial call with the dial
mode setting to
TONE
. If the call connects, leave the switch as is (
TONE
mode), otherwise, set to
PULSE
.
NOTE:
Pulse dialing works for direct dialing and redialing only, not for memory
dialing.
Handset Volume
Adjust the receiver volume of the handset using
the volume control switch on the r ight side of
the handset.
Note:
Ringer options can be selected on the
handset when programming setup
functions (see page 22).
HI
MID
L
O
W
15
Tone/Pulse
Switch
Volume Control
Switch
TELEPHONE SETUP
