background image

BATTERY CAUTIONARY INSTRUCTIONS

BATTERIES: CAUTION
To reduce the risk of fire or injury to persons, read and follow these instructions:

For the cordless handset, use only a 3.6V600mAh GP60AAA3BX Nickel Metal
Hydride (Ni-MH) cordless telephone battery pack (included).

Do not dispose of the batteries in a fire. The cells may explode. Check with local
codes for possible special disposal instructions.

Do not open or mutilate the batteries. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.

Exercise care in handling batteries in order not to short the battery with conducting
materials such as rings, bracelets, and keys. The battery or conductor may overheat
and cause burns.

Do not attempt to rejuvenate the batteries identified for use with this product by
heating them. Sudden release of the battery electrolyte may occur causing burns or
irritation to eyes or skin.

When inserting batteries into this product, the proper polarity or direction must be
observed. Reverse insertion of batteries can cause charging, and that may result in
leakage or explosion.

Remove the batteries from this product if the product will not be used for a long
period of time (several months or more) since during this time the battery could leak
in the product.

Do not store this product, or the batteries identified for use with this product, in high
temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose
of extending shelf life should be protected from condensation during storage
and defrosting.

The EPA certified RBRC   Battery Recycling Seal on the nickel-metalhydride
(Ni-MH) battery indicates TT Systems LLC is voluntarily participating in an
industry program to collect and recycle these batteries at the end of their useful
life, when taken out of service in the United States or Canada. The RBRC 
program provides a convenient alternative to placing used Ni-MH batteries into
the trash or the municipal waste stream, which may be illegal in your area.
Please call 1-800-8-BATTERY for information on Ni-MH battery recycling and
disposal bans/restrictions in your area. TT Systems LLC's involvement in this
program is part of our commitment to preserving our environment and conserving
our natural resources.

Batteries should be stabilized at room temperature prior to use after cold storage.

R

R

 5

GLOSSARY

Useful Features and Terms

PBX ( Private Branch Exchange) --

A small, central, privately owned, switching telephone 

system where a digit (like  9 ) must be dialed first in order to access an outside line.

Calendar/Clock----

Visual display of date, day and time.

Caller ID

--Enables users to view name and number of callers. Contact your local telephone

 company to subscribe to Caller ID Service.

Caller ID Log

--- Stores up to 80 Caller ID entries.

Call Timer

--- Allows timing of phone conversations.

Data/FAX Port

--- Allows connection of a PC of FAX machine directly into the phone 

versus a wall outlet.

Dial from Display

One-button dialing from the Caller ID log.

Display

The Liquid Crystal Display (LCD) shows clock and calendar, number dialed, low 

battery indicator, Caller ID information and call timer.

Flash

A signal sent by the phone to the local telephone company supporting services such

as call waiting.

Message Waiting Indicator

 --- A visual indicator that there are new messages in your 

voice mail box. Requires FSK signaling by phone company. Contact your local telephone 

company to subscribe to Voice Mail Service.

New Calls Indicator

---- A visual indicator that new calls have been received.

Redial

--- Performs single button dialing of last number dialed.

Ringer Lever Control

--- Permits adjustment of the ringer volume level.

Speed Dialing

 ---- Allows programming of frequently dialed numbers so that they can be

 dialed with the two touch speed dial button (40 entries).

Tone/Pulse Option

--- Enables you to switch from pulse (rotary) to tone dialing.

Volume Level Control 

---- Permits volume adjustment of the handset and headset during 

a conversation.

FSK type Signaling

--- A signal used to turn on and off the message waiting indicator,

can be sent by the telephone company with a ringing signal or without.

 42

Содержание PMP-3850

























Отзывы: