Plug in location for the
cell phone cable or
Blue tooth Module
Cell phone icon
Cell phone cable fully
plugged into Enterprise.
Cell phone icon turns from gray to black
Cell phone battery level indicator
Cell phone connected indicator
Cell phone busy indicator
Connecting the Enterprise Telephone to a Cell Phone
There are two ways to connect your cell phone to the Enterprise Telephone, a cable or a Blue tooth Module.
To use a cable, make sure you have the appropriate cable for your cell phone. Plug one end of the cable into
your cell phone and the other end into the connector on the top right side of the Enterprise as shown below.
When you connect it, the screen will read “Cable In” and you will hear a beep to confirm that the connection has
been made. The cell phone icon on the Enterprise screen will turn from light to dark color. If you are using the
Blue tooth Module, simply plug it into Enterprise using the same connector so that it may be paired with your
Blue tooth capable cell phone (see pairing instructions on page 4). When it is connected, the screen will read
“Module In”. If the cell phone battery is not fully charged and you are connected with a cable the Enterprise will
begin to charge the cell phone and the charging indication will be able to be seen on the screen of the cell phone.
When the Enterprise is requesting information from the cell phone, the busy icon will be displayed (a diagonal
arrow in the upper left corner of the screen). This will usually be seen when scrolling through the cell phone
Directory or Text Message inbox. When a cable or Bluetooth Module are disconnected, the screen will read
“Cable Out” or “Module” Out,” respectively.
Enterprise Telephone User Guide
2
