Phonak Audeo B Series, Руководство по обучению

Страница: 75 / 137

Phonak VA DALC Training Guide 73
Phonak EasyCall
II
Product Schematic
Feature overview
• No fitting in Phonak Target™ required — simply pair to cell phone
• Works with any Bluetooth-enabled cell phone, even non-smartphones
• Attached onto the cell phone, never lost or forgotten
• 10 hours talk time
• Standby time > 1 week
Phonak EasyCall
II connects hearing aids wirelessly with any Bluetooth-enabled cell
phone. It binaurally streams the phone call directly to the hearing aids for maximum
speech understanding.
B
A
C
E
D
Device description
A
Call button with built-in indicator light
B
Micro-USB charging input
C
Microphone opening
D
Cell phone scratch- protection ring
E
Optional double- sided adhesive tape
Optional accessories:
For the best placement of
EasyCall, check the
availability of a Phonak
EasyCall hard case to
match your cell phone on
www.phonak-us.com/easycall
Understanding Indicator Lights
Switching on
Switching off
Pairing mode
During phone call
Bluetooth connected
On and ready to
connect
Low battery warning
Charging
Fully charged while
charger attached
Green for 2 seconds
Red for 2 seconds
Rapid blue blink
Solid blue
Blink blue every
5 seconds
(max. 1 minute)
Blink green every
5 sec. (max. 1 hour)
Consecutive red blinks
Solid red
Solid green
After 60 seconds of no activity, the blue blinking will stop
to save power. Pressing the call button will illuminate the
indicator light as long as EasyCall is switched on.