Phonak Audeo B Series, Руководство по обучению

Страница: 64 / 137

62 Phonak VA DALC Training Guide
Off On
Switching On and Off
Slide the power switch
as shown to turn the
ComPilot
II on or off.
power audio
Initial pairing to a phone
• On your phone, ensure that Bluetooth is enabled
and search for Bluetooth devices in the connectivity
setting menu.
• Switch on ComPilot II .
• Press and hold the connect and volume up
buttons simultaneously (2 sec) until the audio
indicator starts to rapidly blink blue.
• Start the pairing process on your phone within
1 minute according to the phone user guide.
• Your phone shows a list of found Bluetooth devices.
Select “Phonak ComPilot
II ” from this list and enter the
code “0000” if prompted.
• ComPilot II requires access to your phone book. When
prompted accept the request.
• After successful pairing, the audio indicator will stop
blinking blue.
Quick pairing instructions are also
shown on the back of ComPilot
II .
Call
Accepting a call
When a call is received on your cell phone:
• ComPilot II indicator light will show a solid blue light.
• It will take about 2 seconds before you hear the ringtone
through your hearing aids.
• Press the main button once you hear the ringtone
through your hearing aids.
If a second call comes in on the same phone:
• Press the main button to accept
• Press and hold the main button (2 sec) to reject
Ending a call
Press the main button to end the call. You can also end a call
on your phone instead of your ComPilot
II .
You will hear the previously-active program or audio source.
Advanced phone options
Rejecting a call
Press and hold the main button (2 sec) until the ringtone stops.
Using your phone to reject the call will have the same effect.
Setting the phone volume
Use the phone’s volume buttons to adjust the phone volume to a
comfortable level.
Surrounding sounds picked up by the hearing aids are reduced
according to the settings made by the hearing care professional.
Reducing surrounding sounds — applies to ComPilot II only
• Press and hold the volume down button (2 sec) for
more reduction.
• Press and hold the volume up button (2 sec) to return to the
default reduction.
"click"
Making a call
Enter the phone number using the phone
keypad and press the call button.
You will hear the dial tone through
your hearing aid.
Speak into ComPilot II — not
into the phone — when the
call is in progress.
Switch ComPilot II off when not in use.
It is only necessary to perform the pairing procedure
once with each Bluetooth device, e.g. a phone.
ComPilot
II will connect automatically to the phone
after the initial pairing.
An incoming call from a second paired phone will be
ignored during an active call.
For more information about Bluetooth pairing
instructions specific to some of the most popular phone
manufacturers, go to:
http://www.phonak-us.com/compilot
II