Phonak Audeo B Series, Руководство по обучению

Страница: 72 / 137

70 Phonak VA DALC Training Guide
Mic Option
0800800800
0:05
Display symbols in standby mode
Display symbols if call is in progress
1 2 3
4 5 6 8 7
1
Time
2
Date
3
Alarm clock on
4
Battery and charging state
5
Ringtone off
F
Keypad locked
G
Handset name (visible if more than one
handset is used with the same base)
H
Signal strength from base
1 2 1
3 4 5 6 7
1
Context dependent functions
2
Elapsed time of call
3
Phone number or name
4
Active call indicator
5
Boost mode on
F
Handset microphone muted
G
Hands free on
Phonak DECT II Phone User Guide
”click“
”click“
1.
2.
Only use the lithium ion battery provided by Phonak, as
otherwise significant personal injury and damage to property
may occur.
1. Make sure the battery contacts
are located as shown.
2. Insert the contacts side first.
3. Insert the battery completely. You
will hear the startup melody as the
phone switches on automatically.
4. Align the battery cover flat on
top of the battery.
5. Slide it gently to click it into place.
into the base after each call to charge the
battery. If the battery symbol shows only
one bar
(<25%), charge the
handset as soon as possible.
Initial charging
The charging status display will only work properly after
the first full charge followed by a full depletion of the battery.
S Place the handset in the base and charge for
8 hours.
S Remove it from the base and only recharge when the battery
is completely depleted.
Inserting the battery
Charging the handset
To open the battery cover, first lift the small latch at the
bottom, then slide the cover open.
The content of the display varies depending on
the settings.
The battery may become warm during charging.
The handset must only be charged in the base. You may
place the handset