PAGE # 4
Call 1-877-744-3649 for assistance or visit us at www.phoenixinno.com
STEP 4:
Assemble cabinet frame
1. Secure center panel (H) inside the cabinet frame by using 3 medium bolts.
(See Fig. 3)
2. Attach horizontal front panel (Q) to right side panel (G) by securing 1 large bolt and medium washer. Also
secure horizontal front panel (Q) to left side panel (I) with 1 large bolt and medium washer and
1 medium bolt. Further secure front panel (Q) to center panel (H) with 1 medium bolt.
(See Fig. 4)
3. Insert tool caddy wire support (L) through the tool caddy door (J) and tighten with 2 wing nuts.
(See Fig. 4.1)
4. Insert tabs on tool caddy bucket (K) into slots in tool caddy door (J).
(See Fig. 4.2)
Note: The tool caddy bucket can be stored when not in use on the inside of the left cabinet door (Z).
5. Attach the wire shelf (N) by inserting into 2 existing holes located on center panel (H).
Extend the legs of the shelf, align into position over the 2 existing holes located on the
cabinet frame (A) and attached with
2 medium bolts.
(See Fig. 4)
STEP 5:
Complete cabinet
1. Secure left (P-L) and right (P-R) grease tray support bars to horizontal front panel (Q) and
back panel (M) with 4 medium bolts.
(See Fig. 5)
2. Insert end of tank support wire (O) into the back of the left side panel (I) and secure other
end of tank support wire by fastening in place with tank support wire bracket (L-1) with
2 medium bolts. (The tank support wire (O) and the tank support wire bracket (L-1) are not
required / not supplied for Natural Gas Model PH603SBN).
3. Attach grease tray face (A-1) to the main grease tray (R) with 2 medium bolts.
(See Fig. 6)
4. Insert grease tray (R) into horizontal front panel (Q).
(See Fig. 6.1)
For Models:
PH603SB
PH603SBN
Fig. 3
Fig. 5
Fig. 6.1
Fig. 6
R
A-1
A
J
L
I
J
Fig. 4
J
I
Fig. 4.1
Fig. 4.2
LIFT TO
CLOSE
DOOR.
