Phoenix Notebook Computer, Руководство пользователя

Страница: 103 / 115

5. If you need to install
sides to release the m a higher capacity module, gently push the edge clips on both
odule. Angle the card slightly upward and gently slide it from
its edge connector slot. Store the card in the anti-static bag that contains your new
w memory card, hold the card with its gold edge connector toward
s, the edge
be able
7.
8. es of
9. mpartment.
10.
The Easy
module(s).
6. To install the ne
the edge connector slot of the compartment. To help you orient the card
connector has been made with two unequal-length sections. You will only
to insert the card in one direction.
Insert the edge connector into the slot. The gold edge connector of the card should
not be visible when the card is fully inserted.
Press the card downward where you should hear an audible click as the latch
the connector secure the card in place.
Once the module is properly seated, you can replace the cover on this co
Replace and tighten the screw.
to Upgrade HDD Module
ard drive in your notebook computer is made to be easily swapped out for upgrading
ld back up your hard drive before attempting o change the hard drive.
he files Make sure that before you install a new drive, all t
in your system should be backed up.
The h .
You shou
To upgrade your Hard Drive
Power down the syste 1. m completely. Turn the system over with the front of the unit
2. e screws that secure the compartment cover and set them in a safe
facing you.
Remove the thre
place.
91