14. Dezember 2015
8
Water Interconnection Revision
5.1.1. S
TANDARD
U
NITS
(„PFC“)
As seen on the picture, this is a standard watercooled power supply.
Best Part to see this is the PFC (Power Factor Correction) Module,
clearly to identify with the big storage choke. Additional to new tubes
(chapter 5.6) and the connector block (chapter 5.4) there has to be
made an additional modification on the PFCs heat exchanger, as
described in chapter 5.4
Replace the connector block at first, and then replace the fittings of
the PFCs heat exchanger. In the other way it won’t be possible to
remount the connector block.
Typical water flow - PFC
