Phoenix Mecano LD75E+P, Инструкция по сборке

Страница: 10 / 24

10
6
Product information
6.1 Mode of operation
The electric cylinder serves for adjustment of the guided components or other similar adjustment tasks. It is driven by a low voltage motor.
6.1.1 Variants of power supply
Power supply 12 / 24 VDC
6.1.2 Variants of force / speed
The following basic executions in terms of force / travel speed of the electric cylinder LD75E+P
are available:
E+P variant
Executions Voltage Push
force Pull
force
Max. Self-lock-
ing (pressure)
Max. Self-lock-
ing (tension)
No-load Rated load
Execution I 12 VDC 750 N 750 N 750 N 400 N 14 mm/s
≤ 11 mm/s
Execution 2 12 VDC 750 N 750 N 750 N 400 N 24 mm/s
≤ 17 mm/s
Execution 3 12 VDC 300 N 300 N 160 N 150 N 24 mm/s
≤ 21 mm/s
Execution 4 12 VDC 300 N 300 N 160 N 150 N 48 mm/s
≤ 39 mm/s
Execution 5 24 VDC 750 N 750 N 750 N 400 N 15 mm/s
≤ 13 mm/s
Execution 6 24 VDC 750 N 750 N 750 N 400 N 25 mm/s
≤ 19 mm/s
Execution 7 24 VDC 300 N 300 N 160 N 150 N 25 mm/s
≤ 23 mm/s
Execution 8 24 VDC 300 N 300 N 160 N 150 N 50 mm/s
≤ 44 mm/s
(Table 1)
The stated values were determined under optimum conditions (room temperature) and may differ as a result of friction loss, temperature
changes or external disturbances.
Self-locking force:
Ensure that the motor is short-circuited after stopping, in order to achieve the maximum self-locking effect (see Table 1). Actua-
tors with integrated control provide this feature as long as the actuator is supplied with power.
Emission:
The A-weighted equivalent continuous sound pressure level of these linear units is approx. 65 dB(A) at a microphone distance of 50 cm.