24
The cylinder will be wrongly positioned after the adjustment. If the cause of the EMERGENCY mechanical adjustment was a
power supply outage and it can be assumed that the drive will continue to be fully functional, the drive can continue to be op-
erated without further action. As soon as the drive is next driven to the S2 end switch plate (retracted), it will go back to the
installation length again.
If the cause was a defective drive, please shut down the plant / application and contact the manufacturer.
EMERGENCY mechanical adjustment is
NOT
a normal operating mode! It is only used for the purpose of bringing a system,
application, machine etc.to a safe position in order to rectify the previous fault or to replace the defective drives!
