Phoenix Mecano DewertOkin IPROXX SE, Инструкции системы

Страница: 5 / 12

04/2020
ID 44411 3.0
04/2020
ID 44411 3.0
®
IPROXX SE/SE+
4
Putting into operation
Connect the handset to the DewertOkin system. The
handset automatically switches to
mode 1 (basic state).
Mode 1
Handset is completely blocked.
Mode LED doesn’t glow .
Mode 2
Customer-specific handset adjustment functions are
released.
Mode LED
glows green or yellow.
Passing the magnetic side of the magnetic
key over the lock symbol once.
Passing the magnetic side of the magnetic
key over the lock symbol once.
Power On
out
Power On
green or yellow
Functions of the display
Function LED LED glows green when a key is pressed,
visual display of first-error security.
Power On LED with battery charging circuit
LED flashes yellow when battery is charging.
LED glows permanently when battery is fully charged or not
connected.
without battery charging circuit
LED glows permanently when connected to the mains.
5
®
Handset IPROXX SE+
Key Configuration
®
Example: Handset IPROXX SE+ with 10 adjustment keys.
Power On
Trendelenburg
Antitrendelenburg
Functions-LED
Backrest up
Footrest up
down
down
Stroke adjustment up
down
down
LED mode
Magnetic lock symbol (switching range)
Power On-LED
Magnetic key
Magnetic side
Function of the blocking device
By passing the magnetic side of the enclosed magnetic key over the lock symbol,
3 modes can be released or blocked .
1) Ÿ To put the handset into operation, connect it to a DewertOkin control unit or a
1)
DewertOkin-drive with integral control PCB. The keyboard of the plugged in
handset is completely blocked (mode 1).
The mode LED next to the lock
doesn’t glow.
Ÿ
Passing the magnetic side of the magnetic key once over the lock symbol releases
the handset adjustment functions. They vary depending on the version or the
customer’s requirement (mode 2).
The mode LED next to the lock glows green.
1)
Consult your customer contact beforehand in order to prevent any possible damage to the product.
Reset
back+footrest
up