Phoenix Contact UM EN TP 3 Series, Руководство пользователя

Страница: 38 / 70

TP 3057M, TP 3057T, TP 3070T, TP 3105T, TP 3121T
4-2
PHOENIX CONTACT 8095_en_00
4.1.1 Ethernet (X5)
A 10/100 Base-T Ethernet interface is located on the side of the operating device.
4.1.1.1 Pin Assignment
Connector in the operating device: RJ45 female connector.
4.1.1.2 Cable
4.1.1.3 Diagnosis
Ethernet diagnostics LEDs are located at the side of the operating device.
Figure 4-2 Arrangement of the ethernet diagnostics LEDs
Table 4-1 Assignment of the Ethernet interface
Pin Designation Function
1 Tx+ Transmitted Data, Positive Polarity
2 Tx- Transmitted Data, Negative Polarity
3 Rx+ Received Data, Positive Polarity
4 n.c. Not Connected
5 n.c. Not Connected
6 Rx- Received Data, Negative Polarity
7 n.c. Not Connected
8 n.c. Not Connected
NOTICE
A twisted pair cable of the category 5 (CAT 5) type must be used. The maximum cable
length is 100 m (328.084 feet).
See the IEEE 802.3 standard for further information.
Table 4-2 Ethernet diagnostics LEDs
No. Color State Designation Function
1 Green On LNK 100 Operation in mode 100 MBit/s
and proper connection with
100BASE-T hub
2 Yellow On ACT Sending / receiving ethernet
data telegram