onlinecomponents.com
UM EN ILC 1XX
2-16
PHOENIX CONTACT
7805_en_02
•
If you damage the connectors during removal:
Remove all the connectors of the Inline Controller.
•
If Inline terminals are installed next to the Inline Controller (see Figure 2-12):
Figure 2-12
Connectors to be removed if terminals are installed next to the Inline
Controller
•
Insert a tool in the base latches of the Inline Controller and pull gently upwards
(Figure 2-13, detail B). Pull out the Inline Controller from the DIN rail (detail C1, C2).
Figure 2-13
Removing the Inline Controller
•
Lever up each connector by pressing on the back connector shaft latching
(Figure 2-13, detail A1).
•
Remove the connectors (Figure 2-13, detail A2).
•
Remove the following connectors:
–
All connectors of the terminal directly connected (A1 to A4)
–
The adjacent connector of the following terminal (B1)
•
Remove the directly adjacent Inline terminal (A).
Observe the information provided in the above user manuals.
ILC 150 ETH A
B
A1... A4
B1
74060008
AUTOMATIONWORX
UL
US
UM
FF
I1
I3
I2
I4
ILC 150 ETH
Order-No.: 2985330
HW/FW: 00/100
MAC Addr.: xx.xx.xx.xx
RESET
Q4
E
I5
I7
I6
I8
PRG
LNK
ACT
Q3
Q2
Q1
RDY FAIL
BSA PF
FR
RUN / PROG
MRESET
STP
7406B009
A2
A1
A
B
C2
C1
C
