Phoenix Contact CUTFOX 10, Оригинальная инструкция по эксплуатации

Страница: 7 / 22

Basic information
102786_en_03 PHOENIX CONTACT
7
English
1 Basic information
1.1 Intended use
The CUTFOX 10 cutting machine cuts cables, litz wires, shrink sleeves and similar profiles
and is particularly suitable for series production.
The CUTFOX 10 is exclusively intended for cutting cables, litz wires, shrink sleeves and
similar profiles up to 8 mm.
Please note that only finely stranded copper litz wires up to 10 mm
2
and solid copper cables
up to a maximum of 2.5 mm
2
may be used. Steel wires or similar may never be used, as
these would destroy the cutter.
Willful modifications to the CUTFOX 10 are prohibited for safety reasons.
The required length and number of wires is entered either directly in the CUTFOX 10 with
the keypad or can be documented on the PC with the supplied software and loaded to the
CUTFOX 10.
1.2 For your safety
WARNING: The CUTFOX 10 may only be used
– as intended and
– when in perfect working order regarding safe functioning.
WARNING: All persons responsible for commissioning, operating and maintenance of
the CUTFOX 10 must be appropriately qualified and have read this user manual. In par-
ticular, they must be able to recognize dangers.
WARNING: Danger of cutting and crushing
Never stick your finger into the outlet slot. The outlet slot may not be manipulated.
NOTE: Only use original replacement parts from Phoenix Contact.
WARNING: The front door is installed for the safety of the operator. It is prohibited in all
circumstances to modify, remove or by means of alterations bypass it.
The CUTFOX 10 may be operated only when the front door is closed.
Disconnect the mains plug before beginning maintenance work.
Make sure that there are no foreign objects inside the housing.