background image

PHOENIX CONTACT

Please observe the following notes

User group of this manual

The use of products described in this manual is oriented exclusively to qualified electricians 

or persons instructed by them, who are familiar with applicable standards and other 

regulations regarding electrical engineering and, in particular, the relevant safety concepts.

Explanation of symbols used and signal words

How to contact us

Internet

Up-to-date information on Phoenix Contact products and our Terms and Conditions can be 

found on the Internet at:

phoenixcontact.com

Make sure you always use the latest documentation. 

It can be downloaded at:

phoenixcontact.net/products

Subsidiaries

If there are any problems that cannot be solved using the documentation, please contact 

your Phoenix Contact subsidiary. 

Subsidiary contact information is available at 

phoenixcontact.com

.

Published by

PHOENIX CONTACT GmbH & Co. KG

Flachsmarktstraße 8

32825 Blomberg

GERMANY

Should you have any suggestions or recommendations for improvement of the contents and 

layout of our manuals, please send your comments to:

[email protected]

This is the safety alert symbol. It is used to alert you to potential personal injury 

hazards. Obey all safety measures that follow this symbol to avoid possible 

injury or death.

There are three different categories of personal injury that are indicated with a 

signal word.

DANGER

This indicates a hazardous situation which, if not avoided, will 

result in death or serious injury.

WARNING

This indicates a hazardous situation which, if not avoided, could 

result in death or serious injury.

CAUTION

This indicates a hazardous situation which, if not avoided, could 

result in minor or moderate injury. 

This symbol together with the signal word 

NOTE

 and the accompanying text 

alert the reader to a situation which may cause damage or malfunction to the 

device, hardware/software, or surrounding property.

This symbol and the accompanying text provide the reader with additional 

information or refer to detailed sources of information.

Содержание CUTFOX 10























Отзывы: