Phoenix Contact CUTFOX 10, Оригинальная инструкция по эксплуатации

Страница: 12 / 22

CUTFOX 10
12
PHOENIX CONTACT 102786_en_03
2.5 Planning cutting jobs with a PC
Data records with cutting jobs can be created at a PC. The data records contain information
about the desired number and length as well as a description of the cable. These data re-
cords are then processed sequentially from the CUTFOX 10.
You can store and process up to 20 projects (lists) with a maximum of 100 data records (cut-
ting jobs).
Connecting the
CUTFOX 10 to a PC
• Switch off the CUTFOX 10 and the PC before connecting.
• Connect the CUTFOX 10 to a PC with the RS-232 cable supplied. The RS-232 inter-
face is on the back side of the CUTFOX 10.
• Switch the CUTFOX 10 and the PC back on.
• Create the cutting jobs at the PC with the help of the CUTSOFT software supplied.
• Switch into the appropriate mode. Press the "mode" button and then the "2" key.
Loading a project to the
CUTFOX 10
• Load the desired project to the CUTFOX 10 with help of the software.
While the project is being loaded to the CUTFOX 10, a display appears on the screen.
When it is finished loading, a display for project selection appears.
Project selection • Select the project number.
The "2" key lowers this number.
The "8" key raises this number.
• Press the "enter" key to confirm the selection.
Then the settings for the selected project are displayed.
Text description
Number of data records
Project number
Project number
Data record number
Number
of data records
Length
Number
To go
Text description