Phoenix Contact 1144175, Руководство пользователя, Страница: 15 / 40

Installation
4083_en_A PHOENIX CONTACT
15/40
4 Installation
4.1 Prevention of electrical discharge damage
The device components are subject to electrostatic discharge (ESD) damage. ESD dam-
age can cause intermittent or complete component failures. Potentially destructive static
voltages can happen during handling of plastic or foam packing material, or when moving
components across plastic or carpets.
If a grounding strap is not available, then to ground yourself, touch the exposed bare metal
of the device with the other hand immediately before inserting the component into the de-
vice.
Avoid contact between the component that is subject to ESD damage and clothing. ESD
voltages emitted from fabric can damage components.
When removing or installing a component that is subject to ESD damage, always place its
components upside on an antistatic surface, in an antistatic card rack, or in an antistatic
bag. If you are returning a component, place it in an antistatic bag before packing it.
4.2 Unpacking
Inspect the package for damage before opening.
Open the package and visually inspect all items for issues.
Confirm that all items are available.
– Switch base packaged items
– Switch within a protective bag, with one power supply slot covered
– Four mounting brackets with screws to attach to the switch base
– Console cable: RJ45 to D-SUB 9
– Installation instruction sheet
– Power and port module packaged items
– Installation instruction sheet
The blank slot filler module comes with screws for securing to the switch base.
If there any missing or damaged items, contact your local Phoenix Contact office.