Phocos MPS45, Руководство пользователя

Страница: 38 / 129

Mount MPS in a way that ensures there is enough space below and above for the air to vertically
air flow through the ventilation grill.
35
2.3.2 Grounding
MPS can work in negative or positive grounded systems.
Select the type of grounding according your system requirements. Respect that all components
in your system should use the same type of grounding!
Positive grounded Negative grounded
2.3.3 Connecting the Battery
Respect that batteries store a substantial amount of energy which can produce high current
and electric arc when a short circuit is applied to the battery. It is recommended to install a
battery fuse which must be able to carry currents of 1.5 times of your nominal system current
for safety considerations. Insert the fuse after you have connected all wires including the load
and make sure that all terminals are fixed tightly with proper polarity.
Negative grounded Positive grounded
Open the cover on the battery terminals side.
Connect the wires leading to the battery with
the proper polarity.
Mind the recommended wire length (See "Table
of recommended wiring for MPS units" on page
3). MPS terminals can connect up to 35 mm
2
wires (AWG#2).
Wire size: See "Table of recommended wiring
for MPS units" on page 3.
Close the covers.
com
com
A
B
8 7 6 5 4 3 2 1
Address Mode
com
com
A
B
8 7 6 5 4 3 2 1
Address Mode
EN