Phocos eCO, Руководство пользователя

Страница: 17 / 60

Battery SOC display
OK (Yellow LED off) Low (Yellow LED on) Very low (Yellow LED flashes)
When the battery voltage is indicated as low, it is recommended to use the remaining
energy economically. The charge controller will subsequently switch off the load.
Load status display
In case of deep discharge or overload/short-circuit of load, the load output is switched
off. This is indicated by:
Normal operation Low voltage disconnect Overload or
(Red LED off) High voltage disconnect short-circuit of load
(Red LED blank) (Red LED flashing)
Low Voltage Disconnect Function
The charge controller is equipped with a low voltage disconnection function to protect
the battery against a deep discharge: This function is controlled by the voltage, and
automatically switches off the load output at a battery voltage lower than 11.0 V. As
soon as the battery reaches a voltage of 12.8 V, the load output is switched on again.
Safety Features
PV terminals Battery terminals Load terminals
Reverse
polarity
Protected
Warning:
Red LED on
Protected (1)
Short circuit (2) Protected Protected (3) Switches off immediately
Overcurrent --- ---
Switches off with a delay
(4)
15