Philips Xitanium LED Xtreme SR Скачать руководство пользователя | Manualshive

Страница: 10 / 40

background image

10

Mechanical Design-in

Form factors

Xitanium  LED  Xtreme  SR  drivers  are  available  in  different
housing  dimensions.  The  specific  dimensions  can  be  found  in
the  driver  datasheet.  3D  CAD  files  are  available  to  verify  fit  and
can be found at www.philips.com/technology.

It is recommended to build in drivers such that the driver housing
and the driver input and output connectors are not affected by
potential water ingress in the luminaire (e.g. due to luminaire sealing
malfunction or condensation).

It  is  highly recommended  to  mount  the  driver by using  all  available
mounting feet  in  order to  achieve  maximum  mechanical  robustness
against shocks and vibration. The recommended mounting torque is
1.5Nm for drivers with plastic mounting feet. This value  should  not
be exceeded in order to prevent deformation of the mounting feet.

Note:

The use of rivets is not recommended since mounting torque

cannot be controlled. Damage to the mounting feet and loose
mounting may result.

Mounting  screw dimensions  should  be  based  on the  specified  fixing
hole  diameter  in  the  driver  datasheet.  Oversized  and  undersized
screws  should  not  be  used  in  order  to  prevent  damage  to  the
mounting feet or loose mounting.

Allow  for  sufficient  free  space  around  the  driver  SimpleSet
antenna  if  the  driver  is  to  be  configured  after  mounting  in  the
luminaire.  The  minimum  recommended  space  is  depending  on  the
type  of SimpleSet  configuration  tool.  Using  the  tool  as  shown  here
(LCN9620), the minimum distance is 19 mm (+/-1mm).

Depending on the application and the use in development, factory or
field, another configuration tool can be selected. Please check the
website www.philips.com/multione to find the correct type.
Every published interface tool is officially approved for use with the
MultiOne software. The tool type number can be found by checking
the LCN label on the tool itself.

Note:

the use of an unapproved tool may result in impaired driver-

tool communication and configuration malfunctioning.

LCN9620 SimpleSet interface tool

Design-in Guide - Philips Xitanium LED Xtreme SR driver

«
...
8
9
10
11
12
...
»

Содержание Xitanium LED Xtreme SR









































Отзывы:

Нет отзывов

Похожие инструкции для Xitanium LED Xtreme SR

Бренд: Danfoss Страницы: 156

VLT AutomationDrive FC 361

Бренд: Danfoss Страницы: 82

VLT HVAC Basic Drive FC 101

Бренд: Danfoss Страницы: 84

VLT HVAC Basic Drive FC 101

Бренд: Danfoss Страницы: 104

Бренд: Danfoss Страницы: 49

VLT OneGearDrive

Бренд: Danfoss Страницы: 40

VLT Micro Drive FC 51 Series

Бренд: Danfoss Страницы: 74

Бренд: Danfoss Страницы: 36

VLT HVAC FC 100

Бренд: Danfoss Страницы: 220

Бренд: Danfoss Страницы: 20

Бренд: BAREL Страницы: 8

Бренд: Eaton Страницы: 208

DFPI-xxx-ND2P-E-NB3 Series

Бренд: Festo Страницы: 4

Бренд: elero Страницы: 31

Бренд: Teac Страницы: 24

Бренд: Fagor Страницы: 60

Бренд: BeiJer Страницы: 84

YSLO FLEX RTS 1P

Бренд: SOMFY Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды