GB12
WelcomeEye Connect / Touch / 05/20
6: Configuration of the WelcomeEye system’s options
a b c d
a: Activation of a second intercom panel (choose
On
if a second intercom panel is used).
b: Activation of the camera option (choose
On
if a camera is used).
c: Configuration of the monitor(s). When the system has several monitors, you must configure
one
Master
monitor and
Slave
monitors. If the system only features one monitor, choose
Off
.
d: Activation of the videophone’s energy saving mode. When the energy saving mode is
activated (
On
), the product’s consumption is reduced. The intercom panel is placed on
standby, therefore the monitor no longer receives calls.
7: Audio settings
a b c d e
a: Choice of ringtone during a call from intercom panel 1
b: Choice of ringtone during a call from intercom panel 2 (only if an additional intercom
panel has been configured)
c: Choice of ringtone during an intercom call (only if an additional monitor has been
configured)
d: Volume settings for the monitor ringtone
e: Volume settings for the monitor loudspeaker during communication.
8: Image settings
Image brightness, contrast and colour settings.
9: Wi-Fi network management (only on WelcomeEye Connect)
a b c
a: Activation (
On
) or deactivation (
Off
) of the Wi-Fi network.
b: Configuration of the time between the visitor ringing the bell and when the notification
is sent to the smartphone.
c: Access to information on the network and Wi-Fi network reset.
Note:
The use of the Wi-Fi network and the smartphone application is detailed in chapter
8 application.
