34 One-Touch Recording
3
Press the REC(ord)/OTR button repeatedly until the
desired recording length appears briefly on the screen and
on the display panel. The
\
light will flash on the display panel.
(The recording length will not appear on the screen if ON
SCREEN MODE is set to OFF.)
• To check the time remaining for an
OTR that is in progress, press the
EXIT/STATUS button. The remaining
time will appear on the screen beside
OTR. (ON SCREEN MODE must be
set to ON or COUNTER.)
• To change the recording length while
an OTR is in progress, press the
REC(ord)/OTR button until the desired
length appears on the VCR display
panel. The length also will appear on
the screen if ON SCREEN MODE is
set to ON or COUNTER.
• If the preset time for a timer recording
comes up during an OTR, the OTR
has priority. The VCR may reset the
missed timer recording for the same
day next year. Or, the recording date
may be erased. To check the schedule
of timer recordings, see page 43.
Helpful Hints
OTR (0:30)
SLP
4
To stop an OTR before recording is finished, press the STOP
9
button.
To cancel the OTR but continue recording, press the
REC(ord)/OTR button repeatedly until REC appears in the upper
left corner of the TV screen. (REC will not appear on the screen if
ON SCREEN MODE is set to OFF. Details are on page 27.) The
\
light will remain on the display panel.
The One-Touch Recording (OTR) function allows you to start an
immediate timed recording 30 minutes to six hours long of the
channel you are watching. Before you begin, make sure:
•
Channels are set up. Details are on pages 13-14.
•
The desired recording speed (SP or SLP) has been selected with
the SPEED button. Details are on pages 41 and 62.
•
There is a tape in the VCR. Make sure the tape’s record tab is
intact (see page 5) and the tape is long enough to record the
program(s). If the end of the tape is reached during an OTR,
recording will stop. The VCR will eject the tape and turn itself
off.
•
The VCR is in VCR position. (The VCR light will appear on the
display panel of the VCR when the VCR is in VCR position. If
the VCR light does not appear, press the VCR/TV button once.)
Starting an OTR
1
Press the VCR button.
2
Use the CH(annel)
8
/
9
button or the Number buttons to
select the channel you want to record.
1
2
3
4
VCR
TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CH
VOL
EXIT/STATUS
TIMER
JOG/SHTL
SMARTPICTURE
INDEX
AUDIO/MUTE
MENU
-
+
CBL / DBS
1
2
3
4
5
6
7
8
9
START
STOP
DATE
DBS
DAILY
PLAY
REW
FF
/OK
STOP
WEEKLY
REV
/OTR
REC
REC
FWD
-
+
-
+
SPEED
0
CLEAR
