— 11 —
VCR to TV Connection (For VR788/55 only)
Connection
Diagram
1 Disconnect the antenna or Cable from the TV and the AC
power cord of the TV from the AC outlet.
2 Connect the antenna or Cable to the VCR.
3 Connect the VCR to the TV using the RF coaxial cable.
4 Plug the AC power cords of the VCR and TV into the AC out-
lets.
CAUTION
Do not plug the AC power cords until all
connections are completed.
To watch a picture from this VCR on the TV, select UHF E36
channel (video channel of this VCR when shipped from the factory).
If you want to change video channel, see “Setting the Video Chan-
nel” .(
✈
P.12)
VCR to TV Connection Using the SCART Cable
With this connection, you can get better pictures and sounds when playing back a tape.
To watch a picture from this VCR on the
TV, select the correct video input on the TV,
to which this VCR is connected.
Use the appropriate SCART cable depending
on the TV’s AV terminal.
Outdoor antenna
Indoor antenna
Back of VCR
RF coaxial cable
(supplied)
Back of TV
RF OUT
VHF
UHF
OUT
ANT. IN
RF OUT
AV1. IN / OUT
Cable
ANT. IN
Back of TV
Back of VCR
To AV1 IN/OUT terminal
OUT
ANT. IN
RF OUT
AV1. IN / OUT
To AV
terminal
OUT
IN: (Not used)
SCART cable
VR788/888-55 NEW
6/3/99, 11:50 PM
11
