A
DVANCED
O
PERATIONS
(
CONTINUED
)
— 18—
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Timer Recording
To record while you’re away, follow steps 1 — 9
below. For each programme you set, the VCR will
turn on, start recording, and turn off automatically.
You can store up to 8 programmes.
Make sure....
• The clock is set to the correct time before
setting timer recording.
• A cassette is inserted in the VCR and the
record tab of the cassette must not be removed.
FOR EACH STEP BELOW, YOU NEED TO
FINISH WITHIN 60 SECONDS; OTHERWISE,
PROGRAMMING WILL HAVE TO BE
RESTARTED FROM STEP 1.
1
Select Timer Mode
1 Press
VCR
.
2 Press
TIMER
.
The Timer Recording menu
appears.
2
Select Programme mode
1 Press
PLAY
5 or
STOP
∞
to select“QUICK PROG-
RAMMING” then press
OK/STATUS
.
The Quick Programming
menu appears.
• If you have already made 8 programmes, “ALL
PROGRAMS IN USE” appears and goes back to
the Timer Recording menu. If this happens, delete
unwanted programmes. (
✈
P.19)
3
Select Channel
Press
CH
5 or ∞ to enter the
TV channel.
• Holding down
CH
5 or ∞
rapidly scans through the
channels.
• To record from external line input, press
CH
5 or ∞
until A/V REAR” or “A/V FRONT” appears.
4
Select Start Time
Press
START +
or
–
(Number button
1
or
4
).
• Each time you press the button,
the set time changes by 1-
minute intervals. If you hold the
button, the set time changes by 30-minute intervals.
5
Select Stop Time
Press
STOP +
or
–
(Number
button
2
or
5
).
• Each time you press the button,
the set time changes by 1 minute
intervals. If you hold the button,
the set time changes by 30-minute intervals.
6
Select Tape Speed
Press
ALT/SPEED
.
• Each time you press the button,
the tape speed alternates
between “SP”, “LP” and “SLP.”
SP, LP : For PAL signal
SP, SLP : For NTSC signal
7
Select Start Date
Press
DATE +
or
–
(Number button
3
or
6
).
• The year and day of the week is
displayed automatically.
8
Confirm Programme
Press
OK/STATUS
or
TIMER
.
“PROGRAM WAS COMPLETED” appears on
the TV screen.
After 5 seconds, the above message disappears,
and the normal TV picture resumes.
The
(Timer) indicator lights up on the display.
• If “PROGRAM NOT COMPLETED” appears, try
again from step 1.
• If “PROGRAM OVERLAPPED” appears, the timer
recording you just programmed overlaps another
timer recording. The Program Review screen will
appear with a magenta line blinking. To change any
item on the overlapping programs, see page 19.
If you want to store other programmes, repeat
steps 1 to 8.
G-CODE
QUICK PROGRAMMING
PROGRAM REVIEW
SELECT: CONFIRM: OK
END: TIMER
ONE TIME PROGRAM
PROGRAM 1
/–
START +/– – –:– – AM
STOP +/– – –:– – AM
REC SPEED SP
DATE +/– – –/– –/– –
DAILY: 8 WEEKLY: 9
CONFIRM: OK END: TIMER
– –
ONE TIME PROGRAM
PROGRAM 1
/– 12
START +/– – –:– – AM
STOP +/– – –:– – AM
REC SPEED SP
DATE +/– – –/– –/– –
DAILY: 8 WEEKLY: 9
CONFIRM: OK END: TIMER
ONE TIME PROGRAM
PROGRAM 1
/–
S
TART +/– 08 : 00 PM
STOP +/– – –:– – AM
REC SPEED SP
DATE +/– – –/– –/– –
DAILY: 8 WEEKLY: 9
CONFIRM: OK END: TIMER
12
ONE TIME PROGRAM
PROGRAM 1
/–
START +/– 08 : 00 PM
STOP +/– 10 : 00 PM
REC SPEED SP
DATE +/– – –/– –/– –
DAILY: 8 WEEKLY: 9
CONFIRM: OK END: TIMER
12
ONE TIME PROGRAM
PROGRAM 1
/–
START +/– 08 : 00 PM
STOP +/– 10 : 00 PM
REC SPEED LP
DATE +/– – –/– –/– –
DAILY: 8 WEEKLY: 9
CONFIRM: OK END: TIMER
12
ONE TIME PROGRAM
PROGRAM 1
/–
START +/– 08 : 00 PM
STOP +/– 10 : 00 PM
REC SPEED LP
DATE +/– 20/07/01
FRIDAY
DAILY: 8 WEEKLY: 9
CONFIRM: OK END: TIMER
12
220/75
01.5.11, 4:16 PM
18
