Mechanical Instructions
4.
4.4.5
IR board Control Unit
Refer to
for details.
1.
unplug the connector from the SSB.
Caution: be careful, as these are very fragile connectors!
2.
Remove all the fixation screws from the IR board control
unit [1]. Refer to
for details.
3.
Remove the IR lense [2], IR board [3] from the
DECO_REAR_COVER. Refer to
for details.
When defective, replace the whole unit.
Figure 4-8 IR board Control Unit removal 1
Figure 4-9 IR board Control Unit removal 2
4.4.6
Speakers
1.
Gently release the tapes that secure the speaker cables.
2.
Unplug the speaker connector from the SSB.
3.
Take the speakers out.
When defective, replace the both units.
4.4.7
Stand bracket
1.
Remove all fixation screws of the bracket.
2.
Lift the bracket from the set.
4.4.8
WIFI module
1.
Unplug the connector from the SSB.
2.
Remove fixation screw that secure the WIFI module, gently
remove the module from the set..
When defective, replace the whole unit.
4.4.9
LCD Panel
1.
Remove the SSB as described earlier.
2.
Remove the PSU as described earlier.
3.
Remove the keyboard control panel as described earlier.
4.
Remove the stand bracket as described earlier.
5.
Remove the IR/LED as described earlier.
6.
Remove the fixations screws that fix the metal clamps to
the front bezel. Take out those clamps.
7.
Remove all other metal parts not belonging to the panel.
8.
Lift the LCD Panel from the bezel.
When defective, replace the whole unit.
4.5
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position. See
to
.
•
Pay special attention not to damage the EMC foams on the
SSB shields. Ensure that EMC foams are mounted
correctly.
19840_107.eps
1
1
1
19840_108.eps
2
3
