Philips TPE1.0U PA, Руководство по обслуживанию

Страница: 51 / 128

0 -51- 0 0 42MF231D/37 0
Back to cover
In case the white-balance data memory IC or main EEPROM which storage all factory settings were
m the old board onto the new board if circuit
Equ
7100 1set
Preparat
RF port of PDP with Fluck54200.
White pattern).
00 and revise lens.
2. Adjustment process
” and INFO key(Red key) with IR Remoter in TV mode, there is a warning OSD
b). I menu, select “Alignments -> Whitepoint”
replaced due to a defect, the data have to be re-adjust.
It is advised to re-soldered DDC IC and main EEPROM fro
board have been replaced, in this case the white-balance data does not need to be re-adjust.
ipments list
Chroma
Fluck54200 video signal generator 1set
RF cable 1pcs
ion and Adjustment process
1. Preparation:
z
Connect rear
z
The setting of Fluck54200 is 187.25Mhz(80db,
z
Turn power of PDP and test instrument on.
z
Before open lens, Press O-CAL of Chrom-71
a). Press the “062596
displayed.
n the factory
c). There are “Color temperature”, “White point red”, “White point green”, “White poin blue”, “Red BL t
offset” and “Green BL offset” items which can be adjusted.