English
- 8 -
• The picture quality may degrade when two devices
are connected to the TV at the same time. In such
a case, disconnect one of the devices.
No picture
• This means your TV is not receiving any transmission.
Make sure the correct source has been selected.
• Is the antenna connected properly?
• Is the antenna cable damaged?
• Are suitable plugs used to connect the antenna?
• If you are in doubt, consult your dealer.
No sound
• Check if the TV is muted. Press the
Mute
button or
increase the volume to check.
• Sound may be coming from only one speaker.
Check the balance settings from
Sound
menu.
Remote control - no operation
• The batteries may be exhausted. Replace the
batteries.
Input sources - can not be selected
• If you cannot select an input source, it is possible
that no device is connected. If not;
• Check the AV cables and connections if you are
trying to switch to the input source dedicated to the
connected device.
Specifications
TV Broadcasting
PAL BG/DK/II’
SECAM BG/DK/LL’
Receiving Channels
VHF (BAND I/III) - UHF (BAND
U) - HYPERBAND
Digital Reception
Fully integrated digital
terrestrial-cable TV(DVB-
T-C)
(DVB-T2 compliant)
Number of Preset
Channels
1000
Channel Indicator
On Screen Display
RF Aerial Input
75 Ohm (unbalanced)
Operating Voltage
220-240V AC, 50Hz.
Audio
Nicam Stereo
Audio Output Power
(WRMS.) (10% THD)
2x8W
Power Consumption
(W)
75W
Weight (kg)
11,60
TV Dimensions DxLxH
(with foot) (mm)
220 x 1112 x 691
TV Dimensions DxLxH
(without foot) (mm)
60/91 x 1112 x 653
Display
49” (124 cm)
Operation temperature
and operation humidity:
0ºC up to 40ºC, 85% humidity
max
