18
Connect to the home Wi-Fi/wired network
On the unit, select
•
[Wired (Ethernet)]
.
The unit starts to acquire an IP
»
address assigned by the network
automatically.
A message appears when the
»
connection is completed successfully.
Tip
The router may fail to assign an IP address, if the
•
DHCP (Dynamic Host Configuration Protocol) is
unavailable or disabled on the router. You may need
to enter the IP address manually, or press
BACK
to
start re-connecting.
LAN4
To Modem
12V=1A
Reset
LAN3
LAN2
LAN1
2/2
Wireless (W
i
F
i
)
Wired (Ethernet)
Press
•
/ repeatedly to select the entry
location;
To enter the desired digits, use the
•
alphanumeric buttons on the remote
control; or press / repeatedly.
Note
Ensure that you never enter an IP address that
•
is already assigned to a computer/device on the
network.
Wired connection
Connect to the router by using the Ethernet
cable
1
Select
[Yes]
, when asked whether to set
up network connection (see ‘First-time
setup’).
2
Use an Ethernet cable to connect the unit
to the router.
NP3500
EN
