Philips SRP9348D/27, Руководство пользователя

Страница: 6 / 20

6
Programming Your Remote
Your remote is designed to control multiple
audio/video devices. To use, you will need to
program the remote for your devices. There
are two different methods you can use to
program the remote, Direct Code Entry or
Auto Code Search.
• The Direct Code Entry method is the
recommended method as it is the simplest
and quickest method in most cases.
• The Auto Code Search method searches
through all the codes in the remote to find
a code for your device.
NOTE: This remote comes preprogrammed for
Roku
®
boxes and Samsung TVs. Press TV for
Samsung TVs and
STR
for Roku boxes.
Direct Code Entry (Recommended)
1. Locate the
Code List
included
with your remote. Find the
section for the type of device you
wish to control, (for example
TV,
STR, DVD, AUD
). Locate the brand
of your device and circle all the
remote codes for the brand.
2. Press and hold down the
SETUP
button on the remote until the
red light on the remote control
turns on. Release the
SETUP
button. The red light will
remain on.
NOTE:
The red light will either be a
small light at the top of the remote
or the power ON/OFF button.
3. Press and release the device
button on the remote for the type
of device you wish to control,
(for example
TV, STR, DVD, AUD
).
The red light will blink once and
remain on.
NOTE:
Any of the device buttons
on the remote can be programmed
to control any of your devices.
For example, you can use the aux
device button on the remote to
control a Satellite Receiver, Digital