background image

7

  Programming Your Remote

Converter Box, Streaming Media 

Player or any device category in 

the 

Code List

4.  Use the number buttons on the 

remote to enter the first 4-digit 

remote code you circled in the 

Code List in Step 1. The red light 

will turn off after entering the 

fourth digit.

5.  Point the remote at the device. 

Test the buttons on the remote 

to see if the device responds as 

you would expect. If the buttons 

do not operate the device, 

return to Step 2 above and use 

the next code that you circled 

for that device.

6.  Repeat steps 1 – 5 for each  

 

 device you wish to control.

Programming Notes

•  Some codes may operate only a few 

functions of your device. There may 

be another code in the 

Code List

 that 

controls more functions. Test other codes 

in the 

Code List

 for more functionality.

•  If you do not find a remote code that 

works your device or there are no codes 

in the 

Code List

 for your device, use the 

Auto Code Search

 method in the next 

section to program your remote.  

•  For combination devices such as a TV/

DVD combo or TV/VCR combo, you may 

have to enter a code for each device. 

•  Write down the remote codes used to 

program the remote for future reference.

Auto Code Search

The Auto Code Search is a process where 

you can search through all the codes stored 

in the remote to find a code for your device. 

It is recommended that you read through all 

the steps below to familiarize yourself with 

the 

Auto Code Search 

before starting  

the process.

Содержание SRP9348D/27





















Отзывы: