13
EN
English
How do I set the remote control for combo devices (TV /
VCR, TV / DVD, DVD / VCR, etc)?
Some combo devices require you to set up two different
source selection keys to control both parts of the combo
device. For example, if you have a TV / DVD combo, you
might need to set up the remote control for both TV and
DVD to operate your TV / DVD combo.
Operation
The remote control does not wake up anymore.
Battery level too low or battery lifetime came to an end.
• Replace the batteries. See chapter
2.1
.
The device I want to operate does not respond at all /
does not respond to all of the key commands.
• Check if the keys you press are available on the original
remote control of the device.
• Try improving
keys. See chapter
2.3.2
.
Not all key functions are available in the database of the
remote control.
• Try learning key functions from the original remote
control. See chapter
3.2
.
Wrong code selected during setup.
• Set up the remote control again for the device. Always
test if the device responds, before leaving setup mode.
See chapter
2.2
.
It may be that the keys that you are trying to use have a
different naming on the original remote control.
• Try out all keys to find the one(s) you need.
The Teletext keys do not work.
• Find out whether your TV is equipped with Teletext.
• Try improving the Teletext
keys. See chapter
2.3.2
.
• Check whether you are using the correct keys to switch
on Teletext. For TV this is the
key; for STB this is the
key.
Batteries
Will my settings be deleted when I replace the batteries?
No. All user settings will be retained in the remote control
memory during battery replacement.
Ser
vice and suppor
t
SRP5004_86_Manual_Def.indd 13
01-06-09 12:34