32BDL3510Q
iv
IMPORTANT INFORMATION
If a television is not positioned in a sufficiently stable
location, it can be potentially hazardous due to falling.
Many injuries, particularly to children, can be avoided by
taking simple precautions such as:
• Using cabinets or stands recommended by the
manufacturer of the television.
• Only using furniture that can safely support the
television.
• Ensuring the television is not overhanging the edge of
the supporting furniture.
• Not placing the television on tall furniture(for example,
cupboards or bookcases)without anchoring both the
furniture and the television to a suitable support.
• Not standing the televisions on cloth or other materials
placed between the television and supporting furniture.
• Educating children about the dangers of climbing on
furniture to reach the television or its controls.
EU Declaration of Conformity
This device complies with the requirements set out in the
Council Directive on the Approximation of the Laws of the
Member States relating to Electromagnetic Compatibility
(2014/30/EU), Low-voltage Directive (2014/35/EU) and
RoHS directive (2011/65/EU).
This product has been tested and found to comply with
the harmonized standards for Information Technology
Equipment, these harmonized standards published under
Directives of Official Journal of the European Union.
Warning:
This equipment is compliant with Class A of EN55032/CISPR
32. In a residential environment this equipment may cause
radio interference.
ESD Warnings
When user close to the monitor may cause the equipment
discharge and reboot to the display of main menu.
Information for EAC
Month and year of
manufacturing
please refer information in Rating
label.
Name and location of
manufacturer
ООО “Профтехника”
Адрес: 3-й Проезд Марьиной рощи,
40/1 офис 1. Москва, 127018, Россия
Importer and
information
Наименование организации: ООО
“Профтехника”
Адрес: 3-й Проезд Марьиной рощи,
40/1 офис 1. Москва, 127018, Россия
Контактное лицо: Наталья Астафьева,
+7 495 640 20 20
Federal Communications Commission (FCC)
Notice (U.S. Only)
Note: This equipment has been tested
and found to comply with the limits for a
Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference when the equipment is
operated in a commercial environment. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case
the user will be required to correct the
interference at his own expense.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
Use only an RF shielded cable that was supplied with the
display when connecting this display to a computer device.
To prevent damage which may result in fire or shock hazard,
do not expose this appliance to rain or excessive moisture.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Envision Peripherals Inc.
490 N McCarthy Blvd, Suite #120
Milpitas, CA 95035
USA
Polish Center for Testing and Certification
Notice
The equipment should draw power from a socket with
an attached protection circuit (a three-prong socket). All
equipment that works together (computer, display, printer,
and so on) should have the same power supply source.
The phasing conductor of the room’s electrical installation
should have a reserve short-circuit protection device in
the form of a fuse with a nominal value no larger than 16
amperes (A).
To completely switch off the equipment, the power supply
cable must be removed from the power supply socket,
which should be located near the equipment and easily
accessible.
A protection mark “B” confirms that the equipment is in
compliance with the protection usage requirements of
standards PN-93/T-42107 and PN-89/E-06251.
