Philips Seismic Edge
21
8. Next, the software launcher will allow you to open the Seismic
Edge control panel and configure your speaker settings if
desired. Select
YES
to modify these settings now, or select
NO
to modify later. Speaker settings are described under the Control
Panel Settings Page in this manual.
Note
: Any time you say No to a Applications Launcher dialog box like
the one shown above, a second box will appear asking if you
want launch the next time Windows is started. Answer Yes or
No as desired.
9. Next, the DirectX
Setup dialog box will appear. Click
OK
.
Philips 4-ch-091100-11-40.qxd 2000/9/11 AM 11:39 Page 21